CURTAINS

Oval shaped aluminium base rail

Available base rail colours. Anodised silver is BQ standard.

• Width:
  Please specify the cushion width/diameter.

• Size:
  Select your bed size. BQ’s standard quilt cover sizing will be then be displayed.
  To order non standard sizing, overwrite the standard measurements shown. An additional charge may apply for non standard sizing.

• Width/Length:
  Please specify the finished quilt cover width and length, excluding piping and flange if present.

Refer HOW TO MEASURE BEDDING for measuring assistance.

• Quilting:
  Channel Frame quilting – Recommended for print fabrics where pattern not easily joined using multi-needle framing. Horizontal or vertical channel available.

• Width, Length, Drop:
  Please specify the finished width, length and drop (in mm) of the quilted product you are making. This will ensure pattern match and placement of fabric joins is addressed.
  If drop measurement is not applicable, please specify 0 mm.

Maximum quilting perimetre for frame quilting is 3040 mm x 2790 mm.

• Size:
  Select a pillowcase size. BQ’s standard width and height measurements will then be displayed.
  To order non standard sizing, overwrite the standard measurements shown.An additional charge may apply for non standard sizing.

• Width, Height:
  Please specify the finished pillowcase width and height, excluding piping and flange if present.

• Insert:
  BQ supply polyester inserts only.
  If ordering a non standard size pillowcase, a standard size insert can be cut down for an additional charge.

• Width, Height:
  Please specify the finished width and height of your wall panel(s) in mm. Finished dimensions will vary depending on thickness of fabric and padding used.
  If exact sizing is required please specify in OPTIONAL FEATURES & SPECIAL INSTRUCTIONS.

• Window Name:
  Please provide location of window to assist with queries, package labelling and installation.

• Width:
  Please provide CLOTH TO CLOTH width (in mm) of each panel ie the finished width of the panel fabric only.

• Drop:
  Please provide CLOTH TO CLOTH drop (in mm) of each panel ie: the finished drop of the panel fabric only.
  BQ will not make adjustments to drop measurements provided, unless requested.

• Window Name:
  Please provide location of window to assist with queries, package labelling and installation.

• Sizing:
  Maximum size is 340cm wide x 300cm drop. BQ Design’s production warranty does not apply to blinds greater than 300cm wide x 300cm drop. Stack ups and batten spacing will be calculated based on total drop of blind and customer styling requirements specified to BQ. Front stacks range from 27.5cm to 33.5cm. For blinds with a contrast band or decorative trim added to the blind base or inset from base, when the blind is fully raised the base of the blind will sit below the stack so the contrast band or trim is visible.

• Width:
  Provide finished width of blind in mm (cloth to cloth). BQ will not make adjustments to measurements provided, unless requested. For blind installed in recess: if you would like BQ to make adjustments to your provided measurements to ensure perfect fit, please provide window recess width and select RECESSED – YES. For multiple blinds installed face fixed on same window or corner windows: if you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH. For bay windows, if blinds to be installed face fixed and you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH. Also provide: (i) width across bay and (ii) depth of bay or supply back wall angles. Refer Price List for further assistance with measuring bay windows.Batten alignment – if multiple blinds in same room and battens are to line up, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS.

• Drop:
  Provide finished drop of blind in mm (cloth to cloth). BQ will not make adjustments to measurements provided, unless requested.For blind installed in recess: if you would like BQ to make adjustments to your provided measurements to ensure perfect fit, please provide window recess drop and select RECESSED – YES.If blind face fixed on or above architrave, consider 20mm thick headboard, fabric thickness, position of brackets, motorisation system and any other componentry, when specifying finished blind drop.If a shaped base is required include this in your drop measurement.Batten alignment – if multiple blinds in same room and battens are to line up, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS.

• Recessed:
  Select YES if blind to be installed in window recess and you would like BQ to make adjustments to the blind measurements you provide, to accommodate for blind componentry and ensure perfect fit.

• Chain/Cord Side:
  Please specify if you would like to operate your blind cord/chain from the left or right side of the blind.If blind is operated by motorisation system, select NO CHAIN.If adding a headrail system to your blind, the blind will be operated by chain rather than cord.

• Headboard projection:
  BQ standard headboard projection: 42mm.
  The following minimum headboard projections apply, depending on method of blind operation ordered:

-Headrail : 42mm

-Cord lock : 30mm

-Pulley only (no cord lock) : 20mm

-Acmeda headrail motor-42mm

-All other motorisation systems – 80mm

• Window Name:
  Please provide location of window to assist with queries, package labelling and installation.

• Sizing:
  Maximum width depends on width of fabric selected size, as fabric joins are not recommended and fabric is turned on sides. BQ Design’s production warranty does not apply to blinds greater than 300cm wide and/or drop greater than 300cm drop. Stack ups and batten spacing will be calculated based on total drop of blind and customer styling requirements specified to BQ. Front stacks range from 27.5cm to 33.5cm. For blinds with a contrast band or decorative trim added to the blind base or inset from base, when the blind is fully raised the base of the blind will sit below the stack so the contrast band or trim is visible.

• Width:
  Provide finished width of blind in mm (cloth to cloth). BQ will not make adjustments to measurements provided, unless requested.
  For blind installed in recess: if you would like BQ to make adjustments to your provided measurements to ensure perfect fit, please provide window recess width and select RECESSED – YES.
  For multiple blinds installed face fixed on same window or corner windows: if you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH.
  For bay windows, if blinds to be installed face fixed and you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH. Also provide: (i) width across bay and (ii) depth of bay or supply back wall angles. Refer Price List for further assistance with measuring bay windows.
  Batten alignment – if multiple blinds in same room and battens are to line up, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS.

• Drop:
  Provide finished drop of blind in mm (cloth to cloth). BQ will not make adjustments to measurements provided, unless requested.
  For blind installed in recess: if you would like BQ to make adjustments to your provided measurements to ensure perfect fit, please provide window recess drop and select RECESSED – YES.
  If blind face fixed on or above architrave, consider 20mm thick headboard, fabric thickness, position of brackets, motorisation system and any other componentry, when specifying finished blind drop.
  If a shaped base is required include this in your drop measurement.
  Batten alignment – if multiple blinds in same room and battens are to line up, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS.

• Recessed:
  Select YES if blind to be installed in window recess and you would like BQ to make adjustments to the blind measurements you provide, to accommodate for blind componentry and ensure perfect fit.

• Chain/Cord Side:
  Please specify if you would like to operate your blind cord/chain from the left or right side of the blind.
  If blind is operated by motorisation system, select NO CHAIN.
  If adding a headrail system to your blind, the blind will be operated by chain rather than cord.

• Headboard projection:
  BQ standard headboard projection: 42mm.
  The following minimum headboard projections apply, depending on method of blind operation ordered:

-Headrail : 42mm

-Cord lock : 30mm

-Pulley only (no cord lock) : 20mm

-Acmeda headrail motor-42mm

-All other motorisation systems – 80mm

• Window name:
  Please provide location of window to assist with queries, package labelling and installation.

• How measure width?:
  IBM = Inside Box Measurement (BQ standard)
  OBM = Outside Box Measurement

• Width:
  Please specify the IBM or OBM width of your pelmet.
  For pelmets wider than 3900mm, customer to organise freight or collection from BQ Notting Hill Victoria.Finished dimensions will vary depending on thickness of fabric and padding used. If exact sizing is required please specify in OPTIONAL FEATURES & SPECIAL INSTRUCTIONS.For corner or bay window installations, provide back wall measurements (including architraves) and detail requirements in OPTIONAL FEATURES & SPECIAL INSTRUCTIONS. Pelmets for corner or bay windows are supplied in separate pieces and joined onsite.For bay windows, also provide: (i) width across bay and (ii) depth of bay or back wall angles. Refer Customised Products Price List – Roman Blinds page 9 for further assistance with measuring bay window

• Drop:
  BQ’s standard pelmet drop is 250mm for straight pelmets and 300 – 350mm for shaped pelmets, based on a window height of 2100mm. Maximum pelmet drop is 400mm.
  Straight (P1/P1B) pelmet – provide same measurements for minimum (min) and maximum (max) pelmet drop.
  Standard shaped (P2/P2B) pelmet – provide same measurement for minimum (min) and maximum (max) pelmet drop, based on the drop required at front corners of pelmet.
  Non standard shaped pelmet – provide the minimum (min) and maximum (max) pelmet drop required, based on the sketch or template you provide.

• Returns:
  BQ recommend the following returns: 100mm for a blind, 150mm for a single curtain track, 200mm for double curtain track. Max returns are 200mm.

• Headboard Projection:
  BQ

• Window name:
  Please provide location of window to assist with queries, package labelling and installation.

• How measure width?:
  IBM = Inside Box Measurement (BQ standard)
  OBM = Outside Box Measurement

• Width:
  Please specify the IBM or OBM width of your pelmet.
  For pelmets wider than 3900mm, customer to organise freight or collection from BQ Notting Hill Victoria.Finished dimensions will vary depending on thickness of fabric and padding used. If exact sizing is required please specify in OPTIONAL FEATURES & SPECIAL INSTRUCTIONS.For corner or bay window installations, provide back wall measurements (including architraves) and detail requirements in OPTIONAL FEATURES & SPECIAL INSTRUCTIONS. Pelmets for corner or bay windows are supplied in separate pieces and joined onsite.For bay windows, also provide: (i) width across bay and (ii) depth of bay or back wall angles. Refer Customised Products Price List – Roman Blinds page 9 for further assistance with measuring bay windows.

• Drop:
  BQ’s standard pelmet drop is 250mm for straight pelmets and 300 – 350mm for shaped pelmets, based on a window height of 2100mm. Maximum pelmet drop is 400mm.
  Straight (P1/P1B) pelmet – provide same measurements for minimum (min) and maximum (max) pelmet drop.
  Standard shaped (P2/P2B) pelmet – provide same measurement for minimum (min) and maximum (max) pelmet drop, based on the drop required at front corners of pelmet.
  Non standard shaped pelmet – provide the minimum (min) and maximum (max) pelmet drop required, based on the sketch or template you provide.

• Returns:
  BQ recommend the following returns: 100mm for a blind, 150mm for single curtain track, 200mm for double curtain track. Max returns are 200mm.

• Headboard Projection:
  BQ

• Width, Height, Depth:
  Please specify the finished cushion width, height and depth, excluding piping if present.

• Insert:
  If you have selected an INSERT, please advise whether you require a polyester or feather insert.
  A standard size insert will be provided or polyester inserts can be cut down to the required sizing for an additional charge. Feather cushion inserts can not be cut down.

• Window Name:
  Please provide location of window to assist with queries, package labeling and installation.

• Sizing:
  Maximum size is 340cm wide x 300cm drop. BQ Design’s production warranty does not apply to blinds greater than 300cm wide x 300cm drop. Stack ups and batten spacing will be calculated based on total drop of blind and customer styling requirements specified to BQ. Front stacks range from 27.5cm to 33.5cm. For blinds with a contrast band or decorative trim added to the blind base or inset from base, when the blind is fully raised the base of the blind will sit below the stack so the contrast band or trim is visible.

• Width:
  Provide finished width of blind in mm (cloth to cloth). BQ will not make adjustments to measurements provided, unless requested.For blind installed in recess: if you would like BQ to make adjustments to your provided measurements to ensure perfect fit, please provide window recess width and select RECESSED – YES.For multiple blinds installed face fixed on same window or corner windows: if you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH.For bay windows, if blinds to be installed face fixed and you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH. Also provide: (i) width across bay and (ii) depth of bay or supply back wall angles. Refer Price List for further assistance with measuring bay windows.Batten alignment – if multiple blinds in same room and battens are to line up, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS.

• Drop:
  Provide finished drop of blind in mm (cloth to cloth). BQ will not make adjustments to measurements provided, unless requested. For blind installed in window/ceiling/pelmet recess: if you would like BQ to make adjustments to your provided measurements to ensure perfect fit, please provide window recess drop and select RECESSED – YES. If blind face fixed on or above architrave, consider 20mm thick headboard, fabric thickness, position of brackets, motorisation system and any other componentry, when specifying finished blind drop. If a shaped base is required include this in your drop measurement.
  Batten alignment – if multiple blinds in same room and battens are to line up, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS.

• Recessed:
  Select YES if blind to be installed in window recess and you would like BQ to make adjustments to the blind measurements you provide, to accommodate for blind componentry and ensure perfect fit.

• Chain/Cord Side:
  Please specify if you would like to operate your blind cord/chain from the left or right side of the blind.If blind is operated by motorisation system, select NO CHAIN.If adding a headrail system to your blind, the blind will be operated by chain rather than cord.

• Headboard projection:
  BQ standard headboard projection: 42mm.
  The following minimum headboard projections apply, depending on method of blind operation ordered:

-Headrail : 42mm

-Cord lock : 30mm

-Pulley only (no cord lock) : 20mm

-Acmeda headrail motor-42mm

-All other motorisation systems – 80mm

• Size:
  Select a throw rug size to suit your bed size. BQ’s standard throw rug sizing will then be displayed. Our standard sizing is based on 65cm length (to suit a drop of 140cm wide fabric) and width is based on the throw rug draping 30cm each side of the standard mattress. To order non standard sizing, overwrite the standard width and length measurements shown. An additional charge may apply for non standard sizing. The width and length measurements you specify will exclude piping and flange if present.

• Quilting:
  Channel (Multi-needle) quilting is standard for BT2 – BT8 throw rug styles, with 22.5cm channels as standard. Other channel sizes and quilting styles are also available. Refer Customised Products Price List for pricing of all quilting styles and throw rug sizes.

• Size:

Select a standard cushion size, width and height measurements will then be shown.

Select Other if non standard sizing is required and provide the width and height finished sizing required. An additional charge may apply for non standard sizing.

• Width and Height:

Please specify the finished cushion width and height, excluding piping and flange if present.

• Insert:

If you have selected an INSERT, please advise whether you require a polyester or feather insert.

If ordering a non standard size cushion, a standard size insert will be provided or polyester inserts can be cut down to the required sizing for an additional charge. Feather cushion inserts can not be cut down.

• Size:
  Select cushion size. BQ’s standard bolster cushion sizing will be provided.
  If ordering a bed bolster, select sizing to suit your bed size.
  To order non standard sizing, overwrite the standard measurements shown. An additional charge may apply for non standard sizing.

• Length, Diameter:
  Provide your finished bolster cushion sizing.

• Insert:
  Please specify if a polyester foam insert is required. If non standard cushion diameter is required, customer to provide insert.

• Window name:
  Please provide location of window to assist with queries, package labelling and installation./li>

• No. of individual curtains:
  If centre opening curtains, specify 2 individual curtains (or a multiple of 2 if ordering for multiple windows of same size).

• Fabric drops or meterage per curtain:
  Please specify for each individual curtain either:
  (i) number of drops of fabric used (specify as a whole number or decimal) or
  (ii) meterage (specify in mm) if using wide width fabric run continuously/railroaded.
  Please consider the curtain fullness required.

• How measure width?:
  HEADED WIDTH PER CURTAIN – The finished width of each curtain, from left side edge to right side edge, when curtain is ready to hang. Includes any gathering or pleating, curtain overlap, returns and creepage if applicable to your chosen curtain heading style.
  TRACK/ROD WIDTH – The width of your straight or bent track or rod. Excludes overlap, returns and finials. Use when ordering ripplefold, wave, relaxed fold, flat panel, scandi, eyelet rod pocket and tab top curtains.

• Finished drop/length:
  The measurement from the top edge to base/bottom edge of the completed/finished curtain.
  Any floor clearances or pooling/puddling must be considered and included in the drop/length provided.

• Overlap:
  If providing TRACK/ROD WIDTH measurements and ordering cord drawn, centre opening curtains, please specify if curtain overlap, please specify if curtain overlap is required.
  Not applicable if ripplefold or wave curtains ordered.

• Returns:
  If providing TRACK/ROD WIDTH measurements, please specify returns size (mm) if returns are required.
  If returns not required, please specify 0.
  Pencil, pinch or gathered curtains – BQ recommends returns are 100mm per side for single track/rod or 150mm per side for double tracks/rods.
  Ripplefold and wave curtains – returns not required unless special brackets ordered.
  Eyelet curtains – returns not applicable.

• Window name:
  Please provide location of window to assist with queries, package labelling and installation.

• No. of individual curtains:
  If centre opening curtains, specify 2 individual curtains (or a multiple of 2 if ordering for multiple windows os the same size).

• Fabric drops or metreage per curtain:
  Please specify for each individual curtain either:
  (i) number of drops of fabric used (specify as a whole number or decimal) or
  (ii) metreage (specify in mm) if using wide width fabric run continuously/railroaded.
  Please consider the curtain fullness required.

• How measure width?:
  HEADED WIDTH PER CURTAIN – The finished width of each curtain, from left side edge to right side edge, when curtain is ready to hang. Includes any gathering or pleating, curtain overlap, returns and creepage if applicable to your chosen curtain heading style.
  TRACK/ROD WIDTH – The width of your straight or bent track or rod. Excludes overlap, returns and finials. Use when ordering ripplefold, wave, relaxed fold, flat panel, scandi, eyelet rod pocket and tab top curtains.

• Finished drop/length:
  The measurement from the top edge to base/bottom edge of the completed/finished curtain.
  Any floor clearances or pooling/puddling must be considered and included in the drop/length provided.

• Overlap:
  If providing TRACK/ROD WIDTH measurements and ordering cord drawn, centre opening curtains, please specify if curtain overlap is required.
  Not applicable if ripplefold or wave curtains ordered.

• Returns:
  If providing TRACK/ROD WIDTH measurements, please specify returns size (mm) if returns are required.
  If returns not required, please specify 0mm.
  Pencil,pinch knife and gathered curtains – BQ recommends returns are 100mm per side for single track/rod or 150mm per side for double tracks/rods.
  Ripplefold or wave curtains – returns not required unless special brackets are ordered.
  Eyelet curtains – returns are not applicable.

• Width:
  Please specify the cushion width/length.

• Depth:
  Please specify the cushion depth/thickness.

• Insert:
  Please specify if a foam insert is required. Standard medium density foam is standard or request quick dry (outdoor) foam in OPTIONAL FEATURES & SPECIAL INSTRUCTIONS if required.

Standard tieback height is 13cm and width depends on curtain width. Please specify if alternate height or non standard shape required.

• Window name:
  Please provide location of window to assist with queries, package labelling and installation.

• Finished drop/length:
  Please provide finished drop/length of curtain.

• Curtain headed width:
  Please provide headed width (in mm) for each individual curtain, including any overlap or returns.

• Window name:
  Please provide location of window to assist with queries, package labelling and installation.

• No. of individual curtains:
  If centre opening curtains, specify 2 individual curtains (or a multiple of 2 if ordering for multiple windows of same size.)

• Fabric drops or metreage per curtain: 
  Please specify for each individual curtain either:
  (i) number of drops of fabric used (specify as a whole number or decimal) or
  (ii) metreage (specify in mm) if using wide width fabric run continuously/railroaded.
  Please consider the curtain fullness required.

• How measure width?:
  HEADED WIDTH PER CURTAIN – The finished width of each curtain, from left side edge to right side edge, when curtain is ready to hang. Includes any gathering or pleating, curtain overlap, returns and creepage if applicable to your chosen curtain heading style.
  TRACK/ROD WIDTH – The width of your straight or bent track or rod. Excludes overlap, returns and finials. Use when ordering ripplefold, wave, relaxed fold, flat panel, scandi, eyelet, rod pocket and tab top curtains.

• Finished drop/length:
  The measurement from the top edge to base/bottom edge of the completed/finished curtain.
  Any floor clearances or pooling/puddling must be considered and included in the drop/length provided.

• Overlap:
  If providing TRACK/ROD WIDTH measurements and ordering cord drawn, centre opening curtains, please specify if curtain overlap is required.
  Not applicable for ripplefold, wave, eyelet, tab top and rod pocket curtains.

• Returns:
  If providing TRACK/ROD WIDTH measurements, please specify returns size (mm) if returns are required.If returns not required, please specify 0 mm.Pencil, pinch, relaxed fold, knife, gathered, flat panel and scandi curtains – BQ recommends returns are 100mm per side for single track/rod or 150mm per side for double tracks/rods.

  Ripplefold and wave curtains – returns not required unless special brackets ordered.

  Eyelet, tab top or rod pocket curtains – returns not applicable.

• Size:
  Select your bed size. BQ’s standard bed valance sizing will then be provided.
  To order non standard sizing, overwrite the standard measurements shown. An additional charge may apply for non standard sizing.

• Width, Length and Drop:
  Provide your finished bed valance sizing.

Refer HOW TO MEASURE BEDDING for measuring assistance.

• Fabric:
  Velvets not suitable.

• Size:
  Select your bed size. BQ’s standard bedspread sizing will then be provided.
  To order non standard sizing, overwrite the standard measurements shown. An additional charge may apply for non standard sizing.

• Width, Length, Drop:
  Provide your finished bedspread sizing. Exclude flange if present.

Refer HOW TO MEASURE BEDDING for measuring assistance.

Finished bedhead dimensions will vary depending on the thickness of fabric used. If exact finished sizing is required, please specify in OPTIONAL FEATURES & SPECIAL INSTRUCTIONS.

• Size:
  Select your bed size. BQ’s standard bedhead sizing will then be provided.
  To order non standard sizing, overwrite the standard measurements shown.

• Width:
  Specify the bedhead width required. Maximum width is 2100mm.
  For non standard sizing, an additional charge may apply.

• Height:
  Specify the bedhead height required. Standard height is 1200mm. Maximum height is 1700mm.
  For non standard sizing, an additional charge may apply.

• Window Name:
  Please provide location of window to assist with queries, package labelling and installation.

• Suitable Fabrics:
  Plain and patterned fabrics. For large products such as bedspreads, quilt covers and some bedhead styles, wide width fabrics are recommended to avoid visible fabric joins. Where fabric joins are required, pattern fabrics will be pattern matched and plain fabrics or fabrics with minimal pattern will have exposed fabric joins. Durable medium to heavy weight fabrics preferred. Heavily embroidered fabrics not recommended for tuft quilting.

• Process Used:
  BQ use a frame quilting method to create even tuft spacing. First we cut and join the fabric and then we quilt, providing perfect pattern and quilting match.

• Process Used:
  BQ use a frame quilting method to create even tuft spacing. First we cut and join the fabric and then we quilt, providing perfect pattern and quilting match.

• Process Used:
  BQ use a frame quilting method to create even tuft spacing. First we cut and join the fabric and then we quilt, providing perfect pattern and quilting match.

• Process Used:
  BQ use a frame quilting method to create even tuft spacing. First we cut and join the fabric and then we quilt, providing perfect pattern and quilting match.

• Window Name:
  Please provide location of window to assist with queries, package labeling and installation.

• Width:
  If providing PIN TO PIN measurements:
  – For face fix blinds,provide your architrave to architrave width and select RECESSED – NO. BQ will not make adjustments to sizing, unless required.
  – For blinds installed in recess,provide window recess width and select RECESSED – YES if you would like BQ to make adjustments to the blind width measurements you provide, to accommodate for brackets and other componentry and ensure perfect fit.
  – For multiple blinds installed face fixed on same window or corner windows,if you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH.
  – For bay windows, if blinds to be installed face fixed and you would like BQ to make adjustments for butting blinds to ensure perfect fit, please specify requirements in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS and provide back wall measurements (including architraves) for your WIDTH. Also provide: (i) width across bay and (ii) depth of bay or supply back wall angles. Refer Price List for further assistance with measuring bay windows.

• How Measure Width:
  PIN TO PIN -The finished width of blind (in mm) from bracket to bracket, including roller and other blind componentry.
  CLOTH TO CLOTH – The finished width of the blind fabric only (in mm) including brackets.
  BACK WALL – Use back wall measurements (in mm) and including architraves for face fixed blinds when multiple blinds to be installed on same window or bay window.
  BQ will make adjustments to sizing you specify, only on request.

• Drop:
  Provide blind drop in mm.
  If a shaped style base is required include this in your drop measurement.
  BQ will not make adjustments to drop measurements provided, unless:
  – requested in OPTIONAL FEATURES AND SPECIAL INSTRUCTIONS or
  – window recess drop measurements are provided and RECESSED YES is selected.

• Recessed:
  Select YES if blind to be installed in window recess and you would like BQ to make adjustments to the blind reasurements you provide, to accommodate for blind componentry and ensure perfect fit.

• Chain/Cord Side:
  Please specify if you would like to operate your blind chain from the left or right side of the blind.
  If blind is to be operated by a motorisation system or spring assist, select NO CHAIN.
  Blind brackets and chain drive will be colour matched to chain colour or fabric if stainless steel or nickel plated chain colour selected.

• Roll:
  NORMAL ROLL: Fabric falls to back of roller (BQ standard).
  REVERSE ROLL: Fabric falls to front of roller, covering roller tube.

70g weight polyester is the standard BQ filling for throw rugs. Other filling options available on request include:

Pre-shrunk 100% cotton lining in ivory colour provided by BQ is our standard lining and used on underside of all non reversible BQ products. Customer can also provide own approved lining. Interlining is also available for delicate fabrics.

Oval shaped aluminium base rail (BQ standard)

Available base rail colours. Anodised silver is BQ standard.

Fancy Finish

50mm band on base of blind

50mm band on side edges of blind

50mm band inset on side edges of blind

50mm band inset on three edges of blind

To hide componentry on sheer blinds

Used to hide lifting componentry such as motorisation or headrail, seen on side of face fixed blinds.
Flaps are made in self fabric and attach to each side of headboard.

All our roman blinds can be motorised enabling automated movement and improved customer comfort, security and energy efficiency.

The blind operates by either a battery or electrical operated motor, installed in tube hidden behind blind headboard and controlled by remote control, wall switch or smart phone. An alternate to cord or chain operated blinds.

Find out more.

Headrail system with chain operation. A range of chain colours are available

Used for cord operated roman blinds to lock the blind into the desired position, rather than relying on the cleat. Activate or release lock by tugging cord. BQ use a heavy duty locking mechanism. A minimum headboard projection of 30mm is required when a cord lock is installed. Please note: Cord locks are not covered by BQ warranty and not recommended for blinds installed in window or ceiling recess, corners, under pelmets or butting bay windows, due to angle required to unlock the mechanism to release the cord.

Easy-Lock Dual Bracket

Bracket projection is 115mm wide for blinds with a left hand and right hand control or 122mm if both blinds controlled same blind end. Available in white, black and sandstone.

Slim Profile Dual Bracket

Bracket projection is 85mm wide and there are two styles available depending on whether you require the top blind to be normal (back) rolled or reverse (front) rolled.
Bracket colours available: white or black. Refer to Slim Profile brochure.

Blinds are made to your exact width and drop specification.

BQ Design’s production warranty does not apply to blinds greater than 260cm wide x 260cm drop. For maximum blind sizing contact us.

Stiffened roller blinds provide you with an opportunity to integrate laces, sheer or solid plain or print fabrics into your room.

Our stiffened roller blinds are unlined, so the original transparency of your fabric is maintained.

A large range of fabrics can be used for stiffened roller blinds. For the best result, we recommend open weave fabrics and soil resistant coated fabrics should be avoided. Your fabric can be tested for suitability prior to ordering.

Some fabrics may be a shade darker after stiffening. If adding self fabric binding to your blind, this fabric will not be stiffened and colour may vary to the blind.

For wider windows, vertical fabric joins will be sewn if required and print fabrics will be perfectly pattern matched. Blinds installed on adjoining windows will also have fabric pattern matched.

For multiple blinds in a room, print fabric will be pattern matched from base of blind. If butting or adjoining blinds are to have pattern flow please notify BQ and ensure enough fabric is provided.

Easy-Lock Dual Bracket

Bracket projection is 115mm wide for blinds with a left hand and right hand control or 122mm if both blinds controlled same blind end. Available in white, black and sandstone.

Slim Profile Dual Bracket

Bracket projection is 85mm wide and there are two styles available depending on whether you require the top blind to be normal (back) rolled or reverse (front) rolled.
Bracket colours available: white or black. Refer to Slim Profile brochure.